net working I40 and I50 Depth Instruments
|
07-31-17, 10:36 AM
Post: #2
|
|||
|
|||
RE: net working I40 and I50 Depth Instruments
Welcome to the Raymarine Forum freedom48,
It is indeed possible to do as you have suggested. Should the i50 Instrument not be interfaced to a SeaTalkng / NMEA 2000 backbone to which other products have been interfaced, then the i50 instrument and i40 instrument would simply be interfaced to one another via an assembly constructed from a SeaTalk to SeaTalkng Adapter Cable, D244 SeaTalk Junction Block, and an appropriate length of SeaTalk Cable having press-fit 3-Pin (F) plugs on each end of the cable. Should the i50 Instrument instead be interfaced to a SeaTalkng / NMEA 2000 backbone to which other products have been interfaced, then a SeaTalk to SeaTalkng Converter would need to be installed within the SeaTalkng / NMEA 2000 backbone. The i40 instrument would then be interfaced to the SeaTalk socket of the SeaTalk to SeaTalkng Converter via the supplied SeaTalk to SeaTalkng Converter Cable. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
net working I40 and I50 Depth Instruments - freedom48 - 07-29-17, 11:35 AM
RE: net working I40 and I50 Depth Instruments - Chuck - Raymarine - Moderator - 07-31-17 10:36 AM
|
User(s) browsing this thread: 2 Guest(s)