Raymarine forum / Raymarine Forums / Autopilots v / ST6001 Smartpilot controller connection to eS127 MFD

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST6001 Smartpilot controller connection to eS127 MFD
08-01-17, 12:26 AM
Post: #5
David OMorchoe Offline
Junior Member
**
 		Posts: 3
Joined: May 2017
Reputation: 0
RE: ST6001 Smartpilot controller connection to eS127 MFD
Hi Chuck,
The newest info from tech support to my installer is the need for a Seatalk 1 to SeatalkNG converter kit. Does this sound correct? I know that my auto pilot is a Raymarine autopilot course computer but I don't know if it is a S1, S2, or S3. Apparently the installer had the model info while talking to tech support. Is it a simple hook up next to the current course computer?
Thanks for your help,
David
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: ST6001 Smartpilot controller connection to eS127 MFD - David OMorchoe - 08-01-17 12:26 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication