Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Help Installing a fuel flow sensor using a C120 Classic?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Help Installing a fuel flow sensor using a C120 Classic?
09-14-17, 09:38 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Help Installing a fuel flow sensor using a C120 Classic?
Welcome to the Raymarine Forum wreckedangle,

NMEA 2000 devices are not designed to be interfaced in the manner that you have suggested. Please click here to view a FAQ addressing this subject. The SeaTalk2/NMEA 2000 port of the C-Series Classic MFD may be interfaced to the spur socket of a NMEA 2000 backbone which has been constructed from SeaTalkng networking components by using an A06048 SeaTalk2 to SeaTalkng Adapter. Please click here to view a FAQ addressing how third party devices may be interfaced to a spur socket of a NMEA 2000 backbone which has been constructed from SeaTalkng networking components.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Help Installing a fuel flow sensor using a C120 Classic? - Chuck - Raymarine - Moderator - 09-14-17 09:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication