[CA] [CA11] ST6001 Calibration Issues

[Chuck - Raymarine - Moderator]

tpburt,

A failure would be identified should any of the above listed resistances show an open circuit (infinite resistance) or deviate from the above listed resistance value by +/-
2 Ohms ... your fluxgate compass would appear to be operational as long as it did not fail the portion of the test which would test for binding. Failing fluxgate compasses should be replaced with a M81190 Fluxgate Compass which may be ordered from an authorized Raymarine dealer. Should this testing not indicate a failure with the fluxgate compass, then the autopilot course computer would be deemed to have suffered a failure, necessitating that it be serviced or replace (the latter would be required for autopilot course computer designs introduced prior to Raymarine's SPX autopilot course computer).