[CA11] ST6001 Calibration Issues

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] ST6001 Calibration Issues

11-16-17, 03:18 PM (This post was last modified: 11-16-17 04:36 PM by Chuck - Raymarine - Moderator.)

Post: #5

tpburt Offline

Junior Member

Posts: 9
Joined: Nov 2017
Reputation: 0

RE: ST6001 Calibration Issues

After doing a third check on the compass, I'm comfortable that is not my problem. The course computer model is a Smart Pilot 4538-001. I don't know where that falls in the lineage of autopilot computers.

Trent

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] ST6001 Calibration Issues - tpburt - 11-13-17, 02:45 PM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 11-14-17, 03:55 PM

RE: [CA11] ST6001 Calibration Issues - tpburt - 11-16-17, 12:32 PM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 11-16-17, 01:36 PM

RE: ST6001 Calibration Issues - tpburt - 11-16-17 03:18 PM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 11-16-17, 04:59 PM

RE: [CA11] ST6001 Calibration Issues - tpburt - 11-16-17, 05:11 PM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 11-16-17, 05:36 PM

RE: [CA11] ST6001 Calibration Issues - tpburt - 11-27-17, 03:39 PM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 11-28-17, 12:30 PM

RE: [CA11] ST6001 Calibration Issues - tpburt - 11-29-17, 09:46 AM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 12-01-17, 10:11 AM

RE: [CA11] ST6001 Calibration Issues - tpburt - 12-01-17, 10:27 AM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 12-01-17, 01:19 PM

RE: [CA11] ST6001 Calibration Issues - Jonflinch - 05-24-19, 02:01 AM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 05-24-19, 08:15 AM

RE: [CA11] ST6001 Calibration Issues - Jonflinch - 01-26-20, 12:25 AM

RE: [CA11] ST6001 Calibration Issues - Chuck - Raymarine - Moderator - 01-27-20, 09:04 AM

User(s) browsing this thread: 1 Guest(s)