[CA] True wind on I70 Wind system pack

[Chuck - Raymarine - Moderator]

jtribb76,

I typically recommend that a D244 SeaTalk Junction Block and an appropriate length of SeaTalk Cable be additionally obtained. The SeaTalk to SeaTalkng Converter Cable supplied with the SeaTalk to SeaTalkng Converter will be plugged into the SeaTalk (yellow) socket of the SeaTalk to SeaTalkng Converter and into the D244 SeaTalk Junction Block. The additionally purchased SeaTalk Cable will then be used to connect the D244 SeaTalk Junction Block to the SeaTalk port of the autopilot. To connect the SeaTalk Cable to the autopilot's SeaTalk terminals, the cable's plug must be cut off, sheathing stripped back to reveal its leads (red, yellow, shield). The red lead will not be used and will be insulated to prevent shorting. The yellow (data) and shield (ground) leads of the SeaTalk cable will then be connected to the corresponding SeaTalk terminals of the autopilot.