Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] Right-left arrows don't show up on

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Right-left arrows don't show up on
03-02-18, 02:38 PM (This post was last modified: 03-02-18 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Right-left arrows don't show up on
Welcome to the Raymarine Forum mauroc,

Please click here to view a FAQ addressing this subject. Per this FAQ, when interfaced to Raymarine Evolution autopilots, the Autopilot Controls feature of MFDs running the latest LightHouse II and LightHouse 3 software will additionally support Dodge commands (+/-1 & +/-10 heading changes) as well as autopilot set-up capability ... these additional autopilot controls features are not supported by MFDs running the latest LightHouse II (i.e. a/c/e/eS/gS-Series MFDs) and LightHouse 3 software (ex. Axiom, Axiom Pro MFDs) which have been interfaced to legacy Raymarine autopilots.

Should the ST6002 Autopilot Control Head have failed, then it would be recommended that it be replaced with a compatible autopilot control head.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] Right-left arrows don't show up on - Chuck - Raymarine - Moderator - 03-02-18 02:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication