Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] units cannot be changed to "knots"

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] units cannot be changed to "knots"
03-07-18, 04:00 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] units cannot be changed to "knots"
Welcome to the Raymarine Forum doublewide,

I would recommend that you try configuring the speed units within the instrument, as the MFD may then slave to the master for speed. Should this not correct the reported behavior, then please respond with the models of instruments and autopilot installed onboard. Please additionally specify the version of software which is presently installed within the SeaTalk to SeaTalkng Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] units cannot be changed to "knots" - Chuck - Raymarine - Moderator - 03-07-18 04:00 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication