The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] ga150 gps not detected by a125mfd.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] ga150 gps not detected by a125mfd.
03-07-18, 11:15 PM (This post was last modified: 03-08-18 10:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
gerald Offline
Junior Member
**
 		Posts: 9
Joined: Jan 2018
Reputation: 0
[CA] ga150 gps not detected by a125mfd.
I added a GA 150 GPS to my a125 mfd. The a125 is connected to ng backbone and is connected by network cable to an a65mfd. The GA 150 does not show up on the data source selection screen of the a125 into which it is plugged or the a65. It provides no gps when the 2 mfds internal gps are off. Is there any way to field test the G150? Everything else seems to be working well on the ng and network on both mfds.Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] ga150 gps not detected by a125mfd. - gerald - 03-07-18 11:15 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication