The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] Speed not working - DST800 / ITC-5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Speed not working - DST800 / ITC-5
04-19-18, 09:21 AM (This post was last modified: 04-26-18 01:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
timgoodyear Offline
Junior Member
**
 		Posts: 10
Joined: Jul 2017
Reputation: 0
Question [CA] Speed not working - DST800 / ITC-5
I have a two year old installation of a DST800V connected to an ITC-5 and thence to a STNG network with an es127, i70, AIS600. The speed display stopped working recently (displaying "--" and with a flashing light on the ITC-5 signifying speed transducer not installed). The depth is working fine. There are two STNG to ST converters (autopilot and ST60+ displays) and a STNG to NMEA0183 (position on SSB and VHF) on the network.

Does anyone have any suggestions on how to troubleshoot this to determine whether it is the transducer or the ITC-5 (and if there are any potential solutions or this means replacement a couple of months after warranty expiration)? If I could get True Wind to work off SOG I would not mind so much...

Many thanks,

Tim

Tim Goodyear
Mojito - Tayana 48
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Speed not working - DST800 / ITC-5 - timgoodyear - 04-19-18 09:21 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication