The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] pulling Nmea 2000 from 400g course computer.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] pulling Nmea 2000 from 400g course computer.
04-24-18, 07:13 PM (This post was last modified: 04-26-18 01:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
bucksh0t Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2018
Reputation: 0
[CA] pulling Nmea 2000 from 400g course computer.
I have a Raymarine 400G course computer along with the 6001+ control unit. I am using a Furuno if nmea2k2 converter to pull the fast heading from the nmea 0183 outputs on the 400G and convert to nmea2000. I am not getting the data but my units show the if nmea2k2 in the string.
Please help
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] pulling Nmea 2000 from 400g course computer. - bucksh0t - 04-24-18 07:13 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication