Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] LH3 to LH2 Data Master conflict

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] LH3 to LH2 Data Master conflict
05-15-18, 03:01 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] LH3 to LH2 Data Master conflict
Welcome to the Raymarine Forum Chuck,

MFDs running LightHouse II software are not designed simultaneous operation within an Ethernet communications network which also features MFDs running LightHouse 3 software. Please click here to view a FAQ addressing this subject. Should you desire to keep these MFDs within the same Ethernet communications network, then it would be recommended that the eS-Series MFD's software be downgraded to LightHouse II v19.03.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] LH3 to LH2 Data Master conflict - Chuck - Raymarine - Moderator - 05-15-18 03:01 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication