[CA] [CA11] NMEA 2000 and Axiom 9

[will40]

Chuck update. I reconfigured the backbone and installed the i70s this afternoon.

The data from both engines came right up on the i70s as Engine 1 (port) and Engine 2 (starboard). The pressures, temps and RPM matched.

I tried to identify the engines with the Axiom 9 and no luck. The same errors as before. I attached an image.

I now assume that the gateway is sending the correct data if the i70s is reporting it. I hope this helps you get closer to the issue with the Axiom not listening.

Let me know the next step?

Bill