[TG11] Add i50 data and Smart Controller to EV100 wheelpilot... is schematic correct?

[basssears]

(05-27-18 09:05 PM)Tom - Raymarine - Moderator Wrote:  The only thing I'd say is that the total length of the spur cables to the i50 displays should be no more than 6m (more recent versions of the NMEA2000 specification discourage daisy-chaining as long cables or chains can cause unreliable comms.) The recommendation now is that each product is on its own spur back to the backbone.

Well, might as well use the parts I'd be buying anyway! After reading your advice I looked at the layout a little more and it's easier to eliminate one T, use the ports on the SeaTalkNG to SeaTalk converter and eliminate the daisy chaining:
http://www.pictureofnectar.com/outside/new_v2.png

Should work great, thanks again for your help.

-- Bass