[CA] [CA11] NMEA 2000 and Axiom 9

[will40]

Chuck

I just wanted to follow up with how I left off on this issue. I did discover that the correct engine data was already on the network the entire time and immediately populated the Axiom's Dashboard page when I selected it. I did not need to identify the engines after all.

I do notice that I lose water temperature and depth data from the Axiom's RV-100 when the engines are running. I used your recommendation and purchased the Actisense NGT-1. I was able to determine that the Smartcraft data is also publishing NMEA sentences that are overwriting the Axiom so it seems I have a conflict of PGN.

While searching the subject online I see that some of the Raymarine MFD users have experienced the same conflict reaching out for help 2-3 years ago. Has there been any changes since then? I noticed that multiple data input selections for MFD's would be the easiest solution. Was this feature ever implemented or considered with Raymarine products before I need to go down the engine OEM road?

Bill