[DG] i50 Depth a "Direct Replacement" for st60 Depth Issue

[Derek - Raymarine - Moderator]

Hi QuirKey

There are two ways to connect the i50 into an older SeaTalk network, the simplest method is to use an A06073 SeaTalk (3 pin curved connector) to round white STng plug, ( which plugs into the white socket on the back of the i50 display). The Curved 3 pin plug will then plug into a D244 3 way SeaTalk block, into which the two adjacent female plugs will also plug into.

This then feeds power to the i50 and shares data with the rest of the network.

The other method is to use the E22158 converter as advised by the support team.

I hope this helps?
Regards
Derek