Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Autopilot EV-150
06-12-18, 07:32 PM
Post: #4
RE: [TG11] Autopilot EV-150
Hello Hooksdj,

Quote:As for the waypoints proximity, yes they were close to each other. Can I adjust that proximity radius or arrival notice?

Yes, that's set on the Axiom, in Home > Alarms > Settings > Waypoint arrival radius.

Quote:I am able to see the patterns options. When I select anyone of them it just does not engage. I do not get any kind of alarm.
...
Could it be I was not going fast enough or is there any possibility my gps or lack of there signal could be playing a role?

You do need GPS data in order to engage Patterns, but I have just tested and can engage with a speed-over-ground of zero. Can you tell me the sequence of keypresses you're making and the results? Menu > Mode > Pattern > [Select pattern type] > [edit pattern parameters] > Auto to engage is the normal process.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Autopilot EV-150 - Hooksdj - 06-02-18, 08:23 PM
RE: [TG11] Autopilot EV-150 - Hooksdj - 06-05-18, 07:13 PM
RE: [TG11] Autopilot EV-150 - Tom - Raymarine - Moderator - 06-12-18 07:32 PM
RE: [TG11] Autopilot EV-150 - Hooksdj - 06-21-18, 01:00 AM
RE: [TG11] Autopilot EV-150 - Hooksdj - 06-27-18, 01:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)