[TG11] Axiom Pro 12 - real vision issue

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Axiom Pro 12 - real vision issue

07-18-18, 10:07 PM (This post was last modified: 07-24-18 07:36 AM by Chuck - Raymarine - Moderator.)

Post: #2

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Axiom Pro 12 - real vision issue

The simplest explanation is that your current range setting is a bit narrow. The default Auto Range setting doesn't suit everybody (including me, actually), so I would suggest going into the menu, setting Range to Manual and ranging out a bit.

If that doesn't get you what you're after, send us some clear, high-resolution, full-screen photos of the sounder screen showing what you're seeing so that we can give you a more in-depth answer.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Axiom Pro 12 - real vision issue - West32 - 07-11-18, 07:43 AM

RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-18-18 10:07 PM

RE: [TG11] Axiom Pro 12 - real vision issue - West32 - 07-23-18, 01:26 PM

RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-25-18, 10:46 PM

RE: [TG11] Axiom Pro 12 - real vision issue - West32 - 07-26-18, 04:04 PM

RE: [TG11] Axiom Pro 12 - real vision issue - Tom - Raymarine - Moderator - 07-27-18, 12:01 AM

User(s) browsing this thread: 1 Guest(s)