Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV1 Linearization via e7 MFD or ST6002

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV1 Linearization via e7 MFD or ST6002
08-01-18, 03:54 PM
Post: #3
Thombusc Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2018
Reputation: 0
RE: [CA11] EV1 Linearization via e7 MFD or ST6002
The set up went OK, I guess. The GPS part did a straight line sync. That was it. None of the expected "do a circle" or "figure 8." So long as the MFD is on the Pilot Setup/commissing screen, the ST60 head shows "calibrate" and clearly the pilot is not yet calibrated because it cannot hold a course.

So, I left it on calibrate and did figure 8's for about 20 minutes...no idea of that worked or not.

Any help here is appreciated.

Tom B
.¤º°`°º¤,¸¸,¤º°`°º¤¤º°`°º¤,
Tom Buscaglia
SV Alera
C&C 37+/40
Vashon Island WA
http://www.sv-alera.com
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Thombusc - 08-01-18 03:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication