Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV1 Linearization via e7 MFD or ST6002

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV1 Linearization via e7 MFD or ST6002
08-02-18, 12:58 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] EV1 Linearization via e7 MFD or ST6002
Tom,

The subject of commissioning the Evolution autopilot via the MFD's Autopilot Controls feature is detailed within Chapter 7.11 Commissioning of the LightHouse II Release 19 Operating Instructions. The MFD's Pilot Controls feature will indicate progress towards completion of linearization. It should not be necessary to continuously view the Pilot Set-up dialog when linearizing. As indicated within the Linearization section of Chapter 7.11, a dialog will be displayed upon completion of linearization listing the maximum detected deviation. As indicated, the maximum detected deviation will also be listed within the Pilot Set-up dialog.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-02-18 12:58 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication