The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [DG] [DG11] AIS issue on ES95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] AIS issue on ES95
08-10-18, 02:05 AM (This post was last modified: 08-16-18 09:07 AM by Chuck - Raymarine - Moderator.)
Post: #1
HRPUFFIN Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[DG11] AIS issue on ES95
I have an ES95 networked via NMEA2000 and the Ng network to a class B AIS unit. I also have a Ray 70 with the AIS normally turned off. The AIS and VHF use a splitter.
A few days ago I updated to the latest Lighthouse version. I now regularly get an alarm from an AIS target which it says is the boat itself. It seems to occur when the target is assumed to be several hundred metres away. This is obviously not strictly possible. I turned off the VHF to eliminate that as a data source, but the error still occurs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] AIS issue on ES95 - HRPUFFIN - 08-10-18 02:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication