The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 7 SeatalkNG vs SeatalkHS?
08-17-18, 12:41 PM (This post was last modified: 08-31-18 12:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 7 SeatalkNG vs SeatalkHS?
Hi,
My 30' sailboat has a ST4000 autopilot and three instruments.

I bought the EV-100 AP to replace the ST4000 AP.

I plan on buying the Axiom 7 with Navionics maps, display only, no transducer.

I'm confused after looking at a suppliers website.
They list an Axiom 7 DV with SeatalkNG.
They list the Axiom 7 w/ Navionics maps, display only with SeatalkHS.

I thought all the Axiom 7s were the same, you chose what map options and transducer options you wanted.
Am I wrong and I have to choose an Axiom 7 with either STNG or STHS?

For instruments I don't have the ST #s but here is what I found on the back of the displays.
Depth Z134
Wind Z094
Speed Z133

I plan on using the ITc5 to connect them to the Axiom 7. Is this correct?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom 7 SeatalkNG vs SeatalkHS? - SVSunDog - 08-17-18 12:41 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)