The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] St60 interface

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] St60 interface
08-20-18, 05:08 PM (This post was last modified: 08-21-18 01:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
ChuckM Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2018
Reputation: 0
Question [CA11] St60 interface
I updated my instruments this Spring, adding an Axiom7 and EVO wheel autopilot. The existing wind, depth, and speed instruments are ST60's from around 2000, and they are interfaced through the E22158 ST1-STng converter. Everything was working fine until a week ago when the ST60 wind instrument started giving bad wind speeds. The true wind speed on the Axiom 7 and the P70 are correct, so wind and speed data must be getting through. However, the ST60 wind instrument showed low and negative numbers for apparent and true wind.


I recalibrated, but that did not solve the issue. Any thoughts?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] St60 interface - ChuckM - 08-20-18 05:08 PM
RE: [CA11] St60 interface - ChuckM - 08-22-18, 03:13 PM
RE: [CA11] St60 interface - ChuckM - 08-24-18, 02:05 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication