[CA] [CA11] ITC 5 Zero Speed (SOW) data

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Francisco,

Please note that the SeaTalk to SeaTalkng Converter has not been designed and tested for use with the Autohelm NavCenter. It is accordingly recommended that it be disconnected from the SeaTalk to SeaTalkng Converter.

Has a fishfinder transducer been interfaced to the a97 MFD's fishfinder transducer socket? If so, which model of fishfinder transducer has been selected from within the Settings of the Fishfinder application?

IIt is recommended that you ensure that the a97, iTC-5, i70S MFID, p70, EV-1 CCU, and ACU have been updated with the latest available Raymarine product software updates. It is also recommended that the DST800's speed transducer be tested to ensure that it's speed sensor has not been fouled and is operational. If found to be operational, please verify that you have spun the transducer's paddlewheel and determined that the iTC-5's Speed LED is no longer flashing, is green, and is constantly illuminated. If so, then the transducer should be inserted back into its housing and the boat should then be operated at speed and it should be calibrated such that speed will be set to SOG at five different speeds at which the vessel is typically operated.

Should the problem persist, then please indicate your results after having ensured that the item's listed above have been addressed.