[DG] ST4000 interface w RC425

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG] ST4000 interface w RC425

09-19-18, 02:27 PM (This post was last modified: 09-20-18 06:39 AM by Derek - Raymarine - Moderator.)

Post: #1

JohnWilbourne Offline

Junior Member

Posts: 6
Joined: Sep 2018
Reputation: 0

[DG] ST4000 interface w RC425

Hi Im trying to get my ST4000 to steer to waypoints etc from my RC425. I have the green wire off the 425 into the NMEA -ve and the white wire into the NMEA +ve
When I try to enter track mode by pressing the Auto key and then +10 and -10 for three seconds, the pilot does not scroll through three displays as indicated, nor does it show any error display. It does appear to adjust course, however I need to double check that. Thank you.

« Next Oldest | Next Newest »

Messages In This Thread

[DG] ST4000 interface w RC425 - JohnWilbourne - 09-19-18 02:27 PM

RE: [DG] ST4000 interface w RC425 - Derek - Raymarine - Moderator - 09-20-18, 06:43 AM

RE: [DG] ST4000 interface w RC425 - JohnWilbourne - 09-21-18, 10:04 AM

RE: [DG] ST4000 interface w RC425 - Derek - Raymarine - Moderator - 09-24-18, 10:51 AM

User(s) browsing this thread: 1 Guest(s)