[CA] [CA11] C classic 120 to Axiom 12
|
09-26-18, 10:25 AM
(This post was last modified: 09-26-18 12:01 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: [CA11] C classic 120 to Axiom 12
Chuck thanks that seems to be a solution. You mention 2 items
1. ES7 needs to be updated to Lighhouse 3. Is that a must ? as now I have the C120 classic and ES7 with lighthouse 2 on same system and if I start a route my ES7 it shows up on the C120. 2. You talk about interfacing the new Axiom with the ES7 via ethernet communications . I assume that is Raynet ? Is that a must? if not whats the pros and cons of doing it. If I connect the Quantum 2 to the Axiom with a hard cable then wouldn't I need a Raynet switch box and to accomplish this as there is only 1 Raynet connection on each MFD |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] C classic 120 to Axiom 12 - [email protected] - 09-25-18, 12:36 PM
RE: [CA11] C classic 120 to Axiom 12 - Chuck - Raymarine - Moderator - 09-25-18, 01:41 PM
RE: [CA11] C classic 120 to Axiom 12 - [email protected] - 09-25-18, 03:26 PM
RE: [CA11] C classic 120 to Axiom 12 - Chuck - Raymarine - Moderator - 09-25-18, 04:11 PM
RE: [CA11] C classic 120 to Axiom 12 - [email protected] - 09-26-18 10:25 AM
RE: [CA11] C classic 120 to Axiom 12 - Chuck - Raymarine - Moderator - 09-26-18, 12:16 PM
RE: [CA11] C classic 120 to Axiom 12 - [email protected] - 09-26-18, 02:24 PM
RE: [CA11] C classic 120 to Axiom 12 - Chuck - Raymarine - Moderator - 09-26-18, 03:07 PM
|
User(s) browsing this thread: 2 Guest(s)