Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
10-14-18, 02:04 AM
Post: #11
[email protected] Offline
Junior Member
**
 		Posts: 42
Joined: Sep 2018
Reputation: 0
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+
Hi Chuck,
Just planning the installation and I find that the layout will be more convenient if I use a SeatalkNG spur cable to the ST2000+ tiller pilot.
Q. 1
Is it ok to connect the autpilot direct to the ST/STNG converter as a spur?
Q. 2
To connect a Seatalk NG spur cable to the autopilot, are the pin/cable colour combinations the same as for ST1? That is:
- Black to Pin 2
- Yellow to Pin 4
- Red disconnected?

Regards
Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60+, seatalk1, seatalk NG, ray55e, A70D and ST2000+ - [email protected] - 10-14-18 02:04 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication