The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom - Still need to acknowledge waypoints?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom - Still need to acknowledge waypoints?
10-16-18, 05:18 PM (This post was last modified: 10-17-18 10:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2018
Reputation: 0
[CA11] Axiom - Still need to acknowledge waypoints?
One of the annoyances with my older E140w is having to manually acknowledge arrival at every waypoint while tracking a route. My routes often have 50 to 100 waypoints, often a minute or less apart and changing course only a few degrees. It's just the nature of the area I cruise. These acknowledgements are distracting to say the least.

Can the Axiom be configured to follow a route automatically making each turn without a manual acknowledgement, similar to an aviation GPS?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom - Still need to acknowledge waypoints? - [email protected] - 10-16-18 05:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication