[CA] [CA11] Connect Yamaha 175 to Axiom 9

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum solidnetworks,

Thanks for additionally providing the photo showing the Yamaha Command Link bus and marine electronics SeaTalkng / NMEA 2000 backbone within your vessel. It appears that your boat's Yamaha Command Link bus features and unused spur socket. If so, a Raymarine Yamaha Link Cable (E70242) may be used to connect the ECI-100 to the unused spur socket of the Yamaha Command Link bus. It also appears that all spur sockets within your marine electronics SeaTalkng / NMEA 2000 backbone are currently in use. Please click here to view a FAQ addressing how one may add spur sockets to a marine electronics SeaTalkng / NMEA 2000 backbone which has been constructed from SeaTalkng networking components. In this case, it would be recommended that the following components be procured to create additional spur sockets within your system's SeaTalkng / NMEA 2000 backbone:
- A06033 400mm SeaTalkng Backbone Cable
- A06064 SeaTalkng 5-Way Connector
- (2) A06032 SeaTalkng Spur Socket Blanking Plugs

An A06038 400mm SeaTalk Spur Cable would be recommended for connecting the ECI-100 to a spur socket within the SeaTalkng 5-Way Connector which will be added to the marine electronics SeaTalkng / NMEA 2000 backbone.