[TG11] AIS 500 fault message while transmitting on VHF

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] AIS 500 fault message while transmitting on VHF

11-17-18, 03:25 PM

Post: #7

Berwick Offline

Junior Member

Posts: 12
Joined: Sep 2018
Reputation: 0

RE: [TG11] AIS 500 fault message while transmitting on VHF

i used another meter and the vswr readings are all within the acceptable range while transmitting on the vhf. I don't know how to check on the AIS frequency. I will try a smaller separate AIS antenna and see if that cures the issue. Thanks

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] AIS 500 fault message while transmitting on VHF - Berwick - 11-02-18, 05:42 PM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Tom - Raymarine - Moderator - 11-05-18, 01:29 AM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Berwick - 11-08-18, 09:52 PM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Berwick - 11-09-18, 02:39 PM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Tom - Raymarine - Moderator - 11-15-18, 01:32 AM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Berwick - 11-16-18, 09:52 AM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Berwick - 11-17-18 03:25 PM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Tom - Raymarine - Moderator - 11-20-18, 12:40 AM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Berwick - 01-03-19, 08:17 PM

RE: [TG11] AIS 500 fault message while transmitting on VHF - Tom - Raymarine - Moderator - 01-08-19, 07:40 PM

User(s) browsing this thread: 2 Guest(s)