European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Instruments 
/
[DG] [DG11] Cannot change ST60/ST60+ units to metres
/
[DG] [DG11] Cannot change ST60/ST60+ units to metres
|
[DG] [DG11] Cannot change ST60/ST60+ units to metres
|
|
11-29-18, 01:34 PM
(This post was last modified: 11-29-18 01:42 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[DG11] Cannot change ST60/ST60+ units to metres
I have an A70D (classic) display connected to an ST60 Multi and ST60+ Graphic via an E22158 converter.
The A70D is set to show depth in metres, but I am unable to change the units on either of the displays to metres. They are both stuck on Feet. If I turn off the power on the A70D then the units can be changed, but as soon as the chartplotter is turned back on, they revert back. Is this issue being caused by the chartplotter or the converter? Both are on the latest software. Is there any way to fix this? Thanks in advance |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[DG11] Cannot change ST60/ST60+ units to metres - garethreynolds - 11-29-18 01:34 PM
RE: [DG11] Cannot change ST60/ST60+ units to metres - Derek - Raymarine - Moderator - 11-30-18, 08:31 AM
RE: [DG11] Cannot change ST60/ST60+ units to metres - garethreynolds - 12-01-18, 11:24 AM
RE: [DG11] Cannot change ST60/ST60+ units to metres - Derek - Raymarine - Moderator - 12-03-18, 10:04 AM
|
User(s) browsing this thread: 3 Guest(s)