[DG] [DG] Interfacing ST2000+ and i60

[garveypeter]

Hi Derek,

That is great info and thank you

Seatalk to device net I'm ok with -

The Smart controller and ST2000+ are Seatalk1 devices and will connect to the yellow port on the E22158 Converter, but as there are two devices is it ok to use a D244 block to combine both or do they need I need separate E22158 Converters?

When you say the power cable of the Seatalk cable "red" is not to be connected to the converter I presume you mean cut it? The cable has a black three pin plug on one end and a yellow plug on the other so find the power "red" and cut.

When the red is cut do the Seatalk1 and Seatalkng circuits will have independent power supplies, or am I just taking the data outputs from the smart controller and the ST200+ and feeding it to the E22158 Converter.

The smart controller will need a power supply to charge it and the ST200+ will need a separate supply to actuate it.

Regards

Peter