Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Upgrade options

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade options
12-27-18, 04:52 PM
Post: #7
serenisea Offline
Junior Member
**
 		Posts: 8
Joined: Nov 2018
Reputation: 0
RE: [CA11] Upgrade options
When getting the new quantum radome, I wanted to check how the data hooks up.

On the existing E120 classic, it looks like it is running straight from the Radome to the large plug on the back of the MFD labeled "Radar". The installation manual says it can be done that way or from the Radome into the SeaTalk hs switch.

With the new Es78, I will need to run it through the SeaTalk hs switch. Does the Quantum come with the data cable (or alternatively wireless interface) that fits the older SeaTalk hs switch, or will I need another cable or converter?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Upgrade options - serenisea - 12-09-18, 02:33 PM
RE: [CA11] Upgrade options - serenisea - 12-11-18, 05:04 PM
RE: [CA11] Upgrade options - serenisea - 12-12-18, 01:38 AM
RE: [CA11] Upgrade options - serenisea - 12-27-18 04:52 PM
RE: [CA11] Upgrade options - serenisea - 12-28-18, 01:15 PM
RE: [CA11] Upgrade options - serenisea - 01-21-19, 01:57 PM
RE: [CA11] Upgrade options - serenisea - 02-02-19, 09:33 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication