[CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems

12-29-18, 12:03 PM (This post was last modified: 12-31-18 11:06 AM by Chuck - Raymarine - Moderator.)

Post: #1

tomlyng Offline

Junior Member

Posts: 6
Joined: Jan 2018
Reputation: 0

[CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems

Please review my attached schematic.
I would like to keep my old RayChart/Pathfinder system due to the radar for now.
1 Do I need to power the new SeaTalkNG network?
2 Is it OK to have both resistors in the Converter due that I don't have a backbone or should I move one resistor closer to the Axiom 9 with a backbone and a Tee-connector?
3 Is there too many devices on the SeaTalk 1 network, if so, should I have two converters?
Any suggestions would be appreciated.
Thanks.

Attached File(s)
.pdf

Raymarine Electric Schematic 12-17-2018.pdf (Size: 39.01 KB / Downloads: 355)

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 12-29-18 12:03 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - Chuck - Raymarine - Moderator - 12-31-18, 11:29 AM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 01-03-19, 07:52 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 01-04-19, 06:00 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - Chuck - Raymarine - Moderator - 01-07-19, 09:23 AM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - tomlyng - 01-08-19, 08:16 PM

RE: [CA11] AXIOM MFDs and AIS added to Raymarine 2002 sytems - Chuck - Raymarine - Moderator - 01-09-19, 08:38 AM

User(s) browsing this thread: 2 Guest(s)