[CA] [[CA11] Axiom MFD with Camino-108 AIS

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Tenedos,

Q1. AIS is working but it seems to be intermittent, ships are identified but they start flashing/blinking pretty soon afterwards.
A1. Please refer to the AIS Target Symbols section of Chapter 8.4: Target tracking of the LightHouse 3.8 Advanced Operation Instructions. The flashing red AIS target symbol is indicative of target which has been deemed to be dangerous. Please refer to the Dangerous Targets and AIS Settings sections of this same chapter to properly configure your MFD's responses to received AIS target data..

Q2. On a side note, I want to make sure I powered setalkng properly. Power cable has three connections. Positive and negative are obvious but I wasn't sure about the third one. I presume it is ground. Since I don't have a separate DC ground on my boat, I connected it to negative wire as well. Is that correct?
A2. Please click here to view a FAQ addressing this subject.