[[CA11] Axiom MFD with Camino-108 AIS

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [[CA11] Axiom MFD with Camino-108 AIS

01-29-19, 11:51 AM (This post was last modified: 01-29-19 03:37 PM by Chuck - Raymarine - Moderator.)

Post: #9

Tenedos Offline

Junior Member

Posts: 8
Joined: Jan 2019
Reputation: 0

RE: [[CA11] Axiom MFD with Camino-108 AIS

Hi Chuck, yes. All targets (whether they are close or not) are displayed in the same uncertain designation (dotted outlined, switches back and forth between gray and green forever).

Here is a though: Could this be related to presence of E22158? I have an E22158 that connects my old ST50 instruments to Seatalk NG backbone. There is also an ST4000+ autopilot on seatalk 1 bus. Heading information comes from seatalk 1 via E22158.

Let me know what things I can try to isolate the problem. It seems to me that this is a bug that results in from the combination of a couple of things. I am happy to try different combinations and eliminate possibilities.