Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] C90W Trackwheel

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C90W Trackwheel
02-04-19, 01:11 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] C90W Trackwheel
mauruuru,

Q1. Can any of these device directly interface to the Axiom Pro 9S or do I need to replace it all?
A1. With the exception of the DSM30 (would recommend replacing with a CP370), each of the devices which you have listed may be interfaced directly to or adapted to be interfaced to an Axiom Pro S MFD.

Q2. If interfaceable how-does it require additional modules of some kind or special cabling?
A2. This is covered in detail within the FAQ referenced within my initial response.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] C90W Trackwheel - mauruuru - 01-17-19, 06:30 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-01-19, 01:24 PM
RE: [CA11] C90W Trackwheel - Waveform - 12-06-19, 02:03 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-04-19, 12:01 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-04-19, 10:56 PM
RE: [CA11] C90W Trackwheel - Chuck - Raymarine - Moderator - 02-04-19 01:11 PM
RE: [CA11] C90W Trackwheel - mauruuru - 02-05-19, 10:42 AM
RE: [CA11] C90W Trackwheel - mauruuru - 05-07-19, 03:31 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication