The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Proper power config for E22158

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Proper power config for E22158
02-06-19, 02:54 PM (This post was last modified: 02-06-19 03:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
amajamar Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2019
Reputation: 0
[CA11] Proper power config for E22158
I am attempting to integrate depth and SOW information from my ST60 Tridata, with my third party (Garmin) NMEA 2000 network. Currently, the Tridata, GPS-RN300, and the GPS antenna is powered through an R55006 junction box. My intent is to use the E22158 to convert Seatalk1 to SeatalkNG and interface with already powered NMEA 2000 network. The GPS-RN300 will be eliminated from the system.

My question is do I use the power cable that came with the E22158? Am I correct in thinking that would be feeding the network in two places?

I am inserting a schematic of my intentions, so please review and let me know if you see any issues with my plans.

Thanks,


Attached File(s)
.pdf  Raymarine config 2-6.pdf (Size: 26.45 KB / Downloads: 350)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Proper power config for E22158 - amajamar - 02-06-19 02:54 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication