The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] No SOG
02-08-19, 10:30 AM (This post was last modified: 02-08-19 12:25 PM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] No SOG
No SOG displayed after start up
I have a ST60+ system with some additions

ST60 Wind speed & direction (2002) (new masthead transducer installed 2014)
ST60 Close hauled (2002)
ST60 Tri-data (2002)
ST6000+ Auto Pilot (2002)
Graphic display (2010)
AIS 500 (2010) with supplied dedicated gps antenna
E90W MFD (2010) with original (2002) Raystar 120 gps* (new battery installed 2018)
Lifetag system (2010)
Radar 4KW 24” radome (2010)

All above were installed by Raymarine main agents in UK

*This gps antenna was originally fitted to the yacht when she was new, and used with an original RL radar/plotter display

Until recently for many years everything worked fine, then after sailing out no SOG on the MFD or anywhere. COG always showing.
I tried restart gps but I do not think that is the problem, and anyway since changing the gps battery the position acquisition is very fast.

I tried switching off the system then on again and eventually (although maybe not as a result of the switch on/off) , the SOG appears.

Any ideas?

Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] No SOG - michaelb_harvey - 02-08-19 10:30 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)