[CA] [CA11] Proper power config for E22158

[Chuck - Raymarine - Moderator]

amajamar,

The autopilot course computer transmits heading along with other supported data received by the autopilot. Should a programmable NMEA 0183 multiplexer be installed, between the NMEA 0183 output of the autopilot course computer and the NMEA 0183 to NMEA 2000 data bridge, then the multiplexer could be programmed to pass only heading and rudder angle data back to the system, thereby avoiding a data loop.

The complete list of NMEA 0183 output sentences transmitted by the Type 100/300 course computer may be found within the (NMEA 0183) Output Port table of Chapter 2.12 Interfacing to other manufacturer's equipment (NMEA) of the Autohelm Type 100/300 Autopilot Installation and Set Up.