Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] replacing C80 with two E80's Seatalk connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] replacing C80 with two E80's Seatalk connection
02-13-19, 12:13 PM (This post was last modified: 02-13-19 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] replacing C80 with two E80's Seatalk connection
Andy,

Q. Is there an issue with cutting the radar cable (number and size of wires) and using a junction block for reconnecting?
A. Should you have radome featuring and analog video interface, as would a radar cable which is attached to the MFD's RADAR socket, then please click here to view a thread in which I had previously addressed the subject of splicing the radar cable of a radar transducer having an analog video interface.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] replacing C80 with two E80's Seatalk connection - Chuck - Raymarine - Moderator - 02-13-19 12:13 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication