Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] replacing C80 with two E80's Seatalk connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] replacing C80 with two E80's Seatalk connection
02-15-19, 06:05 AM (This post was last modified: 02-15-19 09:01 AM by Chuck - Raymarine - Moderator.)
Post: #11
andyschoenb Offline
Junior Member
**
 		Posts: 14
Joined: Apr 2018
Reputation: 0
RE: [CA11] replacing C80 with two E80's Seatalk connection
Chuck - You have been very helpful - I have one last question regarding the high speed network interfacing between the two E80 MFD's (one at helm and one at nav).
It looks like I can get my hands on a E55058 Network Hub, but the specific E55049 cables may be more difficult - can I use standard HS Network cables in their place or are the E55049 cables Raymarine specific and cannot be replaced with standard Network cables?? Thank you again - Andy
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] replacing C80 with two E80's Seatalk connection - andyschoenb - 02-15-19 06:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication