The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] My A128 chart plotter has mind of it’s own

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] My A128 chart plotter has mind of it’s own
02-16-19, 09:44 AM (This post was last modified: 02-20-19 09:57 AM by Chuck - Raymarine - Moderator.)
Post: #1
lord phi Offline
Junior Member
**
 		Posts: 2
Joined: Feb 2019
Reputation: 0
[CA11] My A128 chart plotter has mind of it’s own
After a period of use the chart touchscreen starts jumping about (geographically) and zooms in and zoom out continuously - all without human intervention. In addition the menus (Home, WPT, Menu) cease to function. Various drop-down menus (inc Chart Point) appear and then disappear, with all options disabled whilst each is being presented.

The chart plotter functioned correctly from new for (maybe) three years after which the problems identified above started occurring very occasionally. More recently the problems show within a few minutes of the plotter being switched on.
A reboot restores all functionality for a period after which the failures mentioned above start again.

The 128 chart platter is connected with an EM_TRAC B100 AIS device. Might there be some incompatibility that is causing my problems?

Can you advise any actions I should take or do I have to return the plotter to Raymarine?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] My A128 chart plotter has mind of it’s own - lord phi - 02-16-19 09:44 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication