Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed?
02-26-19, 11:13 AM
Post: #14
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed?
Scott,

Q1. So if properly connected with a data converter, your final comment says the system will support my autopilot's Track mode feature and receive directions from the Axiom, correct?
A1. Correct.

Q2. Does that mean it's capable of following a multi waypoint Route set of instructions from the Axiom, and auto change vessel heading from one waypoint to the next in the Route as the vessel achieves each waypoint destination?
A2. Yes.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrading from E7 to Axiom 9 - cables/converters needed? - Chuck - Raymarine - Moderator - 02-26-19 11:13 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication