The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] ES98 to Ray70 VHF (AIS)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES98 to Ray70 VHF (AIS)
04-06-19, 07:40 PM (This post was last modified: 04-09-19 11:21 AM by Chuck - Raymarine - Moderator.)
Post: #1
Samuelgage Offline
Junior Member
**
 		Posts: 1
Joined: May 2018
Reputation: 0
[CA11] ES98 to Ray70 VHF (AIS)
I am currently running ES98 (Lighthouse II v19) Ray70 VHF together. They were previously connected via NMEA 183 as I was taking full advantage of AIS. I just recently installed a few new items, CP470, and RS150 GPS Antenna. In doing so I installed a starter SeaTalk Backbone and connected the Ray70 with a Spur Cable to the backbone. I also disconnected the NMEA 183. I powered up my MFD and everything appears to working and connected with one exception, my screen says “no AIS”. My question is, is there anything in particular I need to do in settings to get AIS work now that the Ray70 is connect via seatalkng? Also do I to need to turn off internal GPS on my MFD while the RS150 is connected? Or do they work in conjunction? FYI, I am current with all updates.

Thank you

Sam
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ES98 to Ray70 VHF (AIS) - Samuelgage - 04-06-19 07:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication