The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] Converting issues changing from C120 to AxiomPro 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Converting issues changing from C120 to AxiomPro 9
04-24-19, 01:58 PM (This post was last modified: 04-25-19 07:30 AM by Louise - Raymarine - Moderator.)
Post: #1
AKL310 Offline
Junior Member
**
 		Posts: 4
Joined: Apr 2019
Reputation: 0
[LW11] Converting issues changing from C120 to AxiomPro 9
my configuration is as follows:

AxiomPro 9 with latest Update
ST70 Vers. 1.7 – no update (available?) for via AxiomPro provided on Raymarine Download page
SPX 30 Vers. 3.05 – Powersupply for Saetalk Network
ACR AIS Transceiver via NMEA 183 38400 on Port 2 AxiomPro

Problems as follows:
- No AIS Data receiving – system not identified by diagnosis
- Autopilot activation switch in Axiom Menu remains blind (cannot be activated)
- Diagnosis identifies both the ST70 and SPX30 – Rudder Position is active on the menu bar

What needs to be done?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Converting issues changing from C120 to AxiomPro 9 - AKL310 - 04-24-19 01:58 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication