[CA11] Integrating a 250 AIS

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Integrating a 250 AIS

04-29-19, 12:17 PM (This post was last modified: 11-25-19 10:04 AM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Integrating a 250 AIS

Welcome to the Raymarine Forum Tim,

Per the FAQ found here, AIS receivers or AIS transceivers must be interfaced to the MFD's NMEA 0183 port (See the wiring chart below).

[Image: attachment.php?aid=2924]

The NMEA 0183 output terminals of the SHS may be interfaced to the MFD's NMEA 0183 Port #2 Input leads.

Attached File(s) Thumbnail(s)

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Integrating a 250 AIS - morepower - 04-26-19, 02:37 PM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 04-29-19 12:17 PM

RE: [CA11] Integrating a 250 AIS - morepower - 11-24-19, 03:36 PM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 11-25-19, 10:30 AM

RE: [CA11] Integrating a 250 AIS - morepower - 11-26-19, 02:34 AM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 11-26-19, 09:11 AM

RE: [CA11] Integrating a 250 AIS - morepower - 11-30-19, 12:34 PM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 11-30-19, 02:46 PM

User(s) browsing this thread: 1 Guest(s)