The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Mounting AR200

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Mounting AR200
05-26-19, 03:42 PM (This post was last modified: 06-03-19 12:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
Wdeertz Offline
Junior Member
**
 		Posts: 32
Joined: Sep 2018
Reputation: 0
[CA11] Mounting AR200
I’ve read the manual and it doesn’t say the AR200 unit needs a clear view of the sky. I can not get any more cables up my mast so am looking at alternatives. I am considering putting the AR200 unit on the front side of my pilothouse under an overhang (see attached photo). The overhang will provide some protection from the elements and will be level in both directions. The AR200 will be slightly off center of the boat axis as there is a windshield wiper motor directly centerline.

Do you foresee any issues with this proposed mounting location?

Since the AR200 will be up to 6 inches off the centerline axis am I correct that I align the arrow parallel to the centerline?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Mounting AR200 - Wdeertz - 05-26-19 03:42 PM
RE: [CA11] Mounting AR200 - Wdeertz - 06-03-19, 07:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication