[CA11] Installing ng Network with Existing Instruments

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Installing ng Network with Existing Instruments

06-03-19, 11:02 AM

Post: #6

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Installing ng Network with Existing Instruments

Mark,

Q. I just want to confirm that I can calibrate the ST60 instruments through the i70s, correct?
A. More correctly speaking the i70S/i70 MFIDs are designed to calibrate transducers which have been interfaced to an iTC-5. To do so, the i70S/i70 MFID must be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. When interface to the system in the manner which I had last specified, the ST60 instruments will repeat calibrated instrument data from the iTC-5.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Installing ng Network with Existing Instruments - markgadson - 05-29-19, 08:00 AM

RE: [CA11] Installing ng Network with Existing Instruments - Chuck - Raymarine - Moderator - 05-30-19, 03:17 PM

RE: [CA11] Installing ng Network with Existing Instruments - markgadson - 05-30-19, 07:08 PM

RE: [CA11] Installing ng Network with Existing Instruments - Chuck - Raymarine - Moderator - 06-03-19, 10:12 AM

RE: [CA11] Installing ng Network with Existing Instruments - markgadson - 06-03-19, 10:40 AM

RE: [CA11] Installing ng Network with Existing Instruments - Chuck - Raymarine - Moderator - 06-03-19 11:02 AM

RE: [CA11] Installing ng Network with Existing Instruments - markgadson - 06-03-19, 11:18 AM

User(s) browsing this thread: 2 Guest(s)