[CA] [CA11] Mounting AR200

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Wdeertz,

Actually, Chapter 3.2: Selecting a location of the AR200 Installation Instructions[/url] specifies that one should choose a location that provides the most unobstructed view of the sky in all directions:



As the AR200 is a GNSS Receiver & AHRS Sensor, received GPS signal levels may be reduced by installing the AR200 under hard surfaces. If the system already features a GPS sensing device with is receiving sufficient GPS satellite signal for it to function as the system's GPS data source, then one need simply use the system's Data Sources feature to specify which GPS data source will be utilized by the system.

As the AR200 is a magnetic north seeking device, it should not be installed within 3.3' of devices producing a magnetic field. If the wiper motor is installed on the centerline, then the AR200 installed at least 3.3' from the centerline and parallel to the centerline.